STEP 1
RADIO
Install the radio into the mount
using the allen head bolts that
came with your radio.
STEP 2
Place the hex-head bolts into the mount tabs as
shown. Slide the intercom into the mount from the
front side, aligning the hex box bolt heads with the
channel on the side of the intercom. Once in place,
secure the bolt with the lock washer and nut that
came with your intercom.
DMU INSERT
Install radio and intercom
into the insert.
INSTALL INTO MOUNT
Install the DMU assembly
into your mount.
SECURE ASSEMBLY
Use the supplied hardware to secure
the DMU into the mount.
05.
MT-KRX-MM
INSTALLATION GUIDE
MT-KRX-MM
INSTALLATION GUIDE | VERSION 1.0.0 | JUNE 2021
6. Install your radio and intercom into the
DMU Insert
as shown in (DIAGRAM 5)
7. Install the
DMU Insert
asembly into your vehicle
Mount
as shown in (DIAGRAM 6), connecting all cables to the
intercom and two way radio as you complete the install. Make sure all wires are clear and not pinched between
the mount and dash.
8. Install the 4 big self tapping screws into the dash to secure
DMU Insert
into the mount. Be aware these self-tapping
screws will thread into your plastic dash. (LAST IMAGE
DIAGRAM 6)
9. Power on the two-way radio and intercom and do a
communications check.
• Driver to Passenger communication.
• Driver transmits audio out of UTV.
• Passenger transmits audio out of UTV.
• Incoming audio transmission to both driver and passenger.
10. Give Rugged Radios a call if you have any questions, we are
here to help. (805) 541-1696
Install the radio into the mount using the
allen head bolts that came with your radio.
Place the hex-head bolts into the mount tabs as shown. Slide the intercom into the
mount from the front side, aligning the hex box bolt heads with the channel on the
side of the intercom. Once in place, secure the bolt with the lock washer and nut
that came with your intercom.
STEP 1
RADIO
Install the radio into the mount
using the allen head bolts that
came with your radio.
STEP 2
Place the hex-head bolts into the mount tabs as
shown. Slide the intercom into the mount from the
front side, aligning the hex box bolt heads with the
channel on the side of the intercom. Once in place,
secure the bolt with the lock washer and nut that
came with your intercom.
DMU INSERT
Install radio and intercom
into the insert.
INSTALL INTO MOUNT
Install the DMU assembly
into your mount.
SECURE ASSEMBLY
Use the supplied hardware to secure
the DMU into the mount.
06.
