Rugged Radios M1-V, Руководство пользователя

Страница: 8 / 30

MOUNTING BRACKET
TAPPING SCREW
(M5X20MM)
WASHER (M5)
CAR BODY
8
1. Install the mounting bracket in the vehicle using the supplied self-tapping screws.
INSTALLATION
Mobile Installation: Select a location that is safe and easy to reach, and protect you and
your passengers while the vehicle is in motion. Consider installing the radio in a location
and position in which knees and legs will not strike it during sudden braking. Choose a well-
ventilated location that is shielded from direct sunlight and heat sources.
Note
: Extreme care should be taken if drilling into the dash or other areas of any vehicle to
avoid damaging vehicle components.
MOBILE INSTALLATION
• Determine the appropriate angle of the radio using the 3 screw hole positions on the side of the mounting
bracket.
• Double check that all screws are tightened to prevent vehicle vibration from loosening the bracket or radio.
2. Position the radio, then insert and tighten the supplied hex/Phillips screws.