Rugged Computing Y041, Инструкция по сборке и руководство пользователя

Страница: 12 / 16

12
S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of
STEP 2B. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tightened to fully go on.
2A.
Attach Handle
(E)
to Rear Leg
(C)
using:
(#3) M10x70mm Hex Head Bolt, QTY 2
(#7) M10 Flat Washer, QTY 2
2B. Attach Pad (#12) to Main Frame (D) using:
(#5) M8x25mm Hex Head Bolt, QTY 8
(#8) M8 Flat Washer, QTY 8