d. Before install the Diver Carrier Module into the case, connect all the necessary
cables from cpu card(power cable, IDE cable and FDD cable, Parallel port cable,
Serial port cable) first. After the module is installed it will cover the cpu card.
Then install the Drive module, follow the picture as below, first move the module
down to let the whole Carrier goes into the case, after it goes into the case move the
Module slightly up as Arrow-2 then complete it as Arrow-3.
lso there are 6 screws need to install for the Driver module, 4 shown at below picture
at is inside the case and 2 screws shown at below picture that is at left side of the
se
A
th
ca
32
