Rugged CCTV Sentry-700, Инструкция по эксплуатации

Страница: 12 / 24

INSTALLATION
How to install Flush Mount
10
8. After close Groove of Top Cover and Jut of Bottom Cover, please
tighten screws surely to prevent a leak of water.
1. Like Fig.9, Please drill into Bottom Cover to 4.5mm holes of 3pcs by
using drill machine.
2. Please remove plastic holder of 2pcs on the Bottom Cover side.
3. Make a hole of 100mm on the ceiling. Then put the camera into the hole
and please fixing by screw with O-ring.
4. The way of rest installation is the same as previous page.
Holder
Screw
( 4x25)
O-Ring
Drill Dia: 4.5mm
Hole Diameter: 100mm
Wrench 2.5mm