manualshive.com logo in svg

Rugged CCTV ELX16-240, Руководство по установке, Страница: 63 / 72

Поделиться
Скачать
Rugged CCTV ELX16-240 Скачать руководство пользователя страница 63

APPENDIX  

ELX16-240 

 

 

Rugged CCTV 

Error! Unknown document property name.

(v 1.0) 

63 

#1.4. Keeping Data 

To keep the stored data, you should back up or reserve as HDD itself.

 

 

Backup 

(1) Connect backup HDD to IEEE1394 port.  

(2) Go to playback mode with pressing the [Playback] button. 

(3) Press the [SELECT] button and then [MENU] button.

 

 

(4) Run “Backup Manager” with selecting the “Backup Data” menu.

 

 

(5) Set backup range and press the  “Start ” button after selecting backup HDD.

 

 

 

 

 

 

1. Backup HDD should be formatted as FAT32 type. 

2. Backup data can be replayed wit h specific S/W, DVR manager or MiniPlayer.  

3. Backup data is made as  “*.re3” file. If file size is over 2GB, it may not be recognized normally. 

4. In course of backup, “Auto Delete ” function doesn’t run. If HDD is full, recording may be stopped 

instantly.  

5. For more detailed information of DVR manager’s backup, please refer to the  “DVR manager User’s 

Guide ”.

 

 

Содержание ELX16-240









































































Отзывы:

Нет отзывов