RugGear IS740.2 Скачать руководство пользователя страница 4

EN

4

 

FAULTS AND DAMAGES

If there is any reason to suspect that the safety of the device has been compromised, it 

must be withdrawn from use and removed from any ex-hazardous areas immediately. 

Measures must be taken to prevent any accidental restarting of the device.
The safety of the device may be compromised, if, for example:

 

Malfunctions occur.

 The housing of the device shows damage.
 The device has been subjected to excessive loads.

 The device has been stored improperly.
 Markings or labels on the device are illegible.

We recommend that a device displaying errors or in which an error is suspected be 

sent back to 

i.safe MOBILE GmbH

 to be checked.

 

Use of this device assumes that the operator observes the conventional safety  

The following safety regulations must also be complied with:

 

Inside ex-hazardous areas the covers of all interfaces must be closed.

 

To ensure the IP protection, it has to be ensured that all gaskets are present and  

functional. There must be no large gap between the two halves of the housing.

 

The device may only be charged outside ex-hazardous areas.

 

The device may only be charged at ambient temperatures between 5°C … 35°C.

 

The device may not be exposed to any aggressive acids or alkalis.

 

The device must not be taken into zones 0/20 or 1/21.

 

Only accessories approved by 

i.safe MOBILE GmbH

 may be used .

 

The device must be shut down completely during use in potentially explosive areas.

 

 

In case the device has a hand strap, it is not allowed to do the adjustment of the hand 

strap in ex-hazardous areas.“

 

FURTHER SAFETY ADVISES

 

Do not touch the screen of the device with sharp objects. Dust particles and nails may 

scratch the screen. Please maintain the screen clean. Remove dust on the screen with 

a soft cloth gently, and do not scratch the screen.

 Charge the device under indoor conditions only.
 Do not put the device in environments with excessive temperatures, as this could lead 

 Do not charge the device in environments with much dust or humidity.
 The device may only be charged at ambient temperatures b5°C … 35°C.

Содержание IS740.2










Отзывы: