Ruckus Wireless ZoneFlex R700, Быстрая настройка

Страница: 1 / 4

Copyright © 2013 Ruckus Wireless, Inc.
Page 1 of 4
Published December 2013, Part Number 800-70453-001 Rev C
R700 Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions
on how to set up your Ruckus Wireless R700 Dual Band
802.11ac Multimedia Wi-Fi Access Point. After completing
the steps described in this Guide, you will be able to place
the Access Point (AP) at your site and provide wireless
network access to users.
T
HIS
G
UIDE IN
O
THER
L
ANGUAGES
请从以下网站获得该指南的简体中文版
https://support.ruckuswireless.com .
Vous trouverez la version française de ce guide à l'adresse
suivante
https://support.ruckuswireless.com .
こ の ガ イ ド の日本語版は
https://support.ruckuswireless.com
で ご覧 く だ さ い。
이 가이드의 한국어 버전은 웹 사이트
( https://support.ruckuswireless.com )
에서 확인하시기 바랍니다
.
Veja a versão em português (Brasil) deste guia em
https://support.ruckuswireless.com.
Puede ver la versión en español (América Latina) de esta guía en
https://support.ruckuswireless.com.
B
EFORE
Y
OU
B
EGIN
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
• User Guides and Release Notes are available at
http://support.ruckuswireless.com/documents .
• Software Upgrades are available at
http://support.ruckuswireless.com/software .
• Open Source information is available at
http://opensource.ruckuswireless.com .
• Software License and Limited Warranty are available at
http://support.ruckuswireless.com/warranty
.
P
ACKAGE
C
ONTENTS
• R700 Access Point
• Mounting screws and anchors (2)
• T-bar bracket (2 assembled parts)
• Unit removal pin
• Regulatory flyer
• Product warranty statement
• Declaration of Conformity, if required
• This Quick Setup Guide
S
TEP
1: C
OLLECT
S
ETUP
R
EQUIREMENTS
• A computer running Windows 7 (procedures for other OS’s
are similar)
• Two Cat 5e Ethernet cables
• An AC power adapter (sold separately), or
• An 802.3af or 802.3at -compliant Power over Ethernet (PoE)
switch or PoE injector
S
TEP
2: C
ONNECT THE
AP
TO
Y
OUR
C
OMPUTER
1 After removing your Ruckus Wireless AP from its pack-
age, place it next to your computer.
2 Using an Ethernet cable, connect your computer’s net-
work port to one of the two ports on the AP.
3 Using an AC adapter (sold separately), connect the AP to
a convenient (and protected) power source.
Alternatively, connect the 10/100/1000 POE port to a PoE
injector or switch for both power and network connectiv-
ity.
4 Verify that the Power LED on the external enclosure is a
steady green.
Note: The R700 requires a minimum of ZoneFlex (ZF)
firmware version 9.8 or later.
IMPORTANT! If the AP is deployed with a ZoneDirector, then
refer to the ZoneDirector Quick Setup Guide and connect the
AP to your local network.
PoE In
DC input