Ruckus Wireless ZoneFlex P300, Руководство пользователя

Страница: 66 / 85

Enabling Other Management Access Options
Upgrading Manually using a Local File
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
66
3 If you want to use TR-069 or SNMP to manage the bridge, then configure the
settings listed in
Table 10 .
Telnet Port This field lists the default Telnet port of 23 — only if Telnet is active.
You can manually change this port number, if required.
SSH Access By default, this option is enabled (active).
SSH Port This field lists the default SSH port of 22—only if SSH is active.
You can manually change this port number if required.
HTTP Access This option is disabled by default.
HTTP Port This field lists the default HTTP port of 80, if HTTP has been
activated. You can manually change this port number if required.
HTTPS Access By default this option is enabled. This connection mode requires
a security certificate, a copy of which has been pre-installed in the
device.
HTTPS Port This field lists the default HTTPS port of 443—only if HTTPS has
been activated. You can manually change this port number if
required.
Certificate
Verification This notes whether the security certificate linked to the HTTPS
settings has been verified (
PASSED
) or not.
Start Recovery SSID
after ___ seconds of
connectivity loss When connectivity is lost for this period of time, the recovery
process is invoked. Default is 300 seconds. Enter 0 to disable this
function.
Continue service
WLANs when in
recovery mode When the recovery process is invoked, the WLAN service is
continued (Enabled) or halted (Disabled).
Table 10. TR-069 and SNMP Management Options
Option Description
Auto (Default) Enables the Ruckus Wireless device to be
managed by either SNMP servers, Ruckus Wireless
controllers, or Ruckus Wireless FlexMaster. (Refer to
Release Notes for details.)
SNMP only Only allow SNMP management.
Table 9. Management Access Options (Continued)
Option Description