Copyright © 2012 Ruckus Wireless, Inc.
Published June 2012, Part Number 800-70362-001 Rev C
S
TEP
4: C
USTOMIZE
THE
W
IRELESS
S
ETTINGS
1
On the Web interface menu, click
Configuration
>
Radio 2.4G
or
Configuration > Radio 5G
. The Config-
ure :: Wireless :: Common options appear.
2
Verify that the following options are active:
•
Channel
: SmartSelect
•
Country Code
: If you are not located in the United
States, select your current country.
3
Click
Update Settings
if you made any changes.
4
Click any of the “Wireless #” tabs at the top
of the page.
5
In
Wireless Availability
, click
Enabled
.
6
Delete the text in the
SSID
field, then type a name for
your network that will help your users identify the AP in
their wireless network connection application.
7
Click
Update Settings
to save your changes.
8
Repeat Steps 4-7 for each Wireless # interface that you
want to enable.
9
Click
Logout
to exit the Web interface.
10
When the
Ruckus Wireless Admin
login page reappears,
you can exit your browser.
11
Disconnect the AP from the computer and from the
current power source, and then restore your computer to
its original network connection configuration.
S
TEP
5: P
LACE
THE
AP
IN
Y
OUR
S
ITE
1
Disconnect the AP’s power adapter from the power out-
let.
2
Move the AP to its permanent location (accessible to
both power and network connections). See enclosed
Mounting Instructions for physical installation.
3
Use an Ethernet cable to connect the 10/100/1000 port
to your network.
4
Connect the AP power adapter (or PoE power supply) to
the AP, then to a convenient power source.
5
Verify that the 10/100/1000 port LED is lit.
After a short pause to re-establish the Internet connection,
you can test the AP.
S
TEP
6: V
ERIFY
THE
I
NSTALLATION
1
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you previously
configured.
2
If you can connect, open a browser and link to any public
Web site.
Congratulations!
Your wireless network is active and ready
for use.
For More Information
You can now use the wireless network to log into the AP’s
Web interface. For information on how to configure the AP
from the Web interface, refer to the
Ruckus Wireless
ZoneFlex Access Point User Guide
or the Online Help,
available from within the Web interface.
Default AP Settings (For Your Reference)
Network Names (SSIDs)
Wireless1—Wireless8
(2.4GHz radio)
Wireless9—Wireless16
(5GHz radio)
Security (Encryption
method)
Disabled for each wireless
interface
Default Management IP
Address
192.168.0.1
OPTIONAL: IF YOU WANT TO SWITCH FROM DHCP
(DEFAULT)
If you anticipate logging into the AP regularly to perform
monitoring or maintenance (once it is in place), you may want
to consider assigning a static IP address to the AP.
In a default AP configuration, the AP uses a DHCP-
assigned IP address.
A. On the menu, click
Configuration
>
Internet
.
B. Click the
Static IP
option.
C. Fill in the
IP Address
and
Mask
fields.
D. Click
Update Settings
to save your changes.
NOTE:
If you will be using PoE, you will need a Cat 5e (or
better) Ethernet cable to connect the AP to the PoE injec-
tor or switch.
