Ruckus Wireless ZoneDirector 3000 Скачать руководство пользователя страница 181 | Manualshive

Страница: 181 / 430

Ruckus Wireless ZoneDirector 3000 Скачать руководство пользователя страница 181

Creating a WLAN

Authentication Method

ZoneDirector 9.8 User Guide, 800-70599-001 Rev B

181

•

Autonomous

: Autonomous WLANs are special WLANs designed to continue

providing service to clients when APs are disconnected from ZoneDirector. See

Autonomous WLANs

Autonomous WLANs

The Autonomous WLAN usage type supports Open authentication and WPA2
(WPA2/WPA-Mixed), WEP or no encryption only. In this configuration, client authen-
tication/association requests are processed at the access point and are not
forwarded to ZoneDirector. The AP maintains connections to authorized clients and
continues providing wireless service after disconnection from ZoneDirector.

NOTE:

If AP Auto Recovery is enabled (

Configure > Access Points > Access Point

Policies

), the APs will reboot after the specified time. Therefore Auto Recovery

should be disabled if at least one Autonomous WLAN is configured.

There are several limitations of autonomous WLANs, including:

•

ZoneDirector displayed client statistics may be incorrect.

•

Stations may be disconnected when an unreachable ZoneDirector becomes
reachable again, as ZoneDirector will re-deploy all WLAN services to AP radios.

•

Client capacity limits defined on ZoneDirector will not be applied on Autonomous
WLAN APs, and clients may be disconnected upon reconnecting to ZoneDi-
rector if those limits are reached.

•

The following features are not supported with Autonomous WLANs:

•

Zero-IT, Dynamic PSK, Dynamic VLAN, Web Auth, Accounting server, Tunnel
Mode, Grace Period, Force DHCP, Client Fingerprinting, Auto Proxy, Service
Schedules.

•

ZoneDirector’s Blocked Clients list will not be enforced on Autonomous
WLANs when a Layer 2 ACL is assigned. To force blocking of these clients,
copy individual clients to the assigned L2 ACL.

Authentication Method

•

Authentication Method defines the method by which users are authenticated
prior to gaining access to the WLAN. The level of security should be determined
by the purpose of the WLAN you are creating.

•

Open

[Default]: No authentication mechanism is applied to connections. Any

encryption method can be used.

«
...
179
180
181
182
183
...
»

Содержание ZoneDirector 3000















































































































































































































































































































































































































































Отзывы:

Нет отзывов