Ruckus Wireless T811-CM, Руководство по установке

Страница: 30 / 54

T811-CM AP Installation Guide, 800-71436-001 Rev A
30
Installing the T811-CM
Deploying the T811-CM
• The IP address assigned to the CM by the CMTS DHCP server.
• An administrative computer as configured as described in Preparing the Administrative
Computer .
• One Cat5e or better Ethernet cable.
• 7/16” (11mm) wrench.
2 Use a 7/16” (11mm) wrench to remove the reset button and diagnostic Ethernet port screw-in
access plug (see
Figure 6 ).
3 Connect one end of an Ethernet cable to the Ethernet port on the T811-CM, and then connect
the other end to the administrative computer’s Ethernet port.
4
On the administrative computer, open a Web browser window.
5 In the address or location bar, enter the IP address that is assigned to the cable modem, for
instance:
192.168.100.1
--OR--
<DHCP-assigned CM IP address>
The cable modem Web interface displays a login prompt.
6 Leave User Name blank.
7 In Password, type ADMIN .
8 Click Log In . The Connection Status page appears, indicating that you have successfully logged
on to the cable modem Web interface.
Continue with Viewing the Software Status .
Viewing the Software Status
The Software Status page displays information about the current software version installed on the
cable modem and the CM system status.
1
Log into to the
Status
page as described in Logging Into the CM Web Interface .
2 In the left sidebar, click Software . The Software Status page appears, as shown in Figure 9 .
Figure 9. Software Status page