Installing the T504
Verifying CM and AP Operation
T504 Strand Mount Concurrent AP with Integrated CM Installation Guide, 800-70610-001 Rev A
37
Figure 16. The Configuration > Radio 2.4 > Wireless 1 Page
2
In
Wireless Availability,
click
Enabled
.
3
In
Broadcast SSID,
click
Enabled
.
4
Clear the
SSID
box, and then type a unique and descriptive name that you want
to call this wireless network.
For example, you can type
Ruckus Wireless AP
. This SSID is the name that
helps users identify this wireless network in their wireless network connection
application.
NOTE
You can also configure other wireless settings on this and other
Wireless
#
pages (in addition to the settings described above), although it is not necessary
for completing the AP installation.
5
Click
Update Settings
. You have completed configuring the basic wireless
settings of the AP.
6
Continue with
Verifying CM and AP Operation
The cable operator has their own CM and AP acceptance tests. Make sure you
verify the T504 operation as defined in the acceptance tests before leaving the
installation site.
DRAFT
