Q910-US00 User Guide
Part Number: P01-Q910-US00
15
Physical Installation of Q910 LTE Access
Point
Mounting Instructions
3.
Drill holes required for the mounting hardware.
NOTE
The hardware required for mounting to a wall are not included in the mounting kit.
4.
Attach the mounting bracket to the flat
surface using the mounting hardware.
5.
Using the mounting hardware instructions, tighten the hardware to secure the mounting bracket.
6.
Continue with
Step 4: Mounting the Linkage Bracket to the U-Joint Bracket
on page 11.
Step 3B: Attaching the Mounting Bracket to a Metal Pole
1.
Insert the open end of one steel clamp into the upper two slots on the mounting bracket.
2.
Take the other steel clamp and insert it into the lower two slots on the mounting bracket.
NOTE
The clamps can be daisy-chained together to accommodate larger poles.
3.
Use the clamps to attach the mounting bracket to the pole. Tighten the clamps to 3 N.m or 27 in-lbs., or per
manufacturer’s specifications.
4.
Continue with
Step 4: Mounting the Linkage Bracket to the U-Joint Bracket
on page 11.
Step 4: Mounting the Linkage Bracket to the U-Joint Bracket
The linkage bracket attaches to the U-joint bracket using an M8 bolt and washer set. The linkage bracket is symmetrical and either end
can be attached to the U-joint bracket.
NOTE
If you are mounting Q910 horizontally, use the longer (175 mm) linkage bracket. If you are mounting Q910 vertically, use the
shorter (100 mm) linkage bracket.