PWJDM Ruckus License Plate Relocator (Swingarm Straight)
Installation Guide
This install will take about 15-30 minutes depending on how much you care about your bike. Since this thing vibrates more than
the floozy living next door, we recommend you use light to medium strength threadlock on all the bolt threads. Do not us a high
strength version or you’ll never get this off again.
ITEM# QTY
COMPONENT
DESCRIPTION
1
1
PWJDM license plate bracket
2
2
Hex cap bolts
3 2
PWJDM
washers
4 1
Locking
washer
5
1
Flange bolt
6 1
Install
manual
1. Mount your license plate to the bracket.
a. Assemble the hardware socket bolt through a colored washer, through the license plate, then thread into the
bracket. We recommend you apply light to medium strength threadlock.
Revision Date: 9/24/2008, 4:49:48 PM
1
