28
Operating instructions for PODOLOG NOVA 3s | REV. 0
5.2.6 STORING SETTINGS
To make your work easier, you can store up to three different settings for rota-tional speed,
rotation direction and extraction power. Using the [M1], [M2] and [M3] buttons, you can store
and call the required settings.
Set the required rotational speed with the speed control knob. Select righthand or lefthand
rotation direction. Select the extraction power level. Press the corresponding [M1], [M2] or
[M3] button for approximately 2 seconds.
“Setting stored” appears in the display.
With a short press on [M1], [M2] or [M3], the corresponding stored value is called.
You can change the settings at any time while the machine is in oper-ation.
The speed setting may not exceed the permitted maximum speed of your tool.
M1
M2
M3
