Ruby RC-1001, Руководство пользователя

Страница: 40 / 41

Publication date: March, 2011
Revision A2
34
4. Maintenance
4-1. Resolving No Link Conditions
The possible causes for a no link LED status are as follows:

The attached device is not powered on

The cable may not be the correct type or is faulty

The installed building premise cable is faulty

The port may be faulty
4-2. Q&A
1. Computer A can connect to Computer B, but cannot connect to Computer C
through the WEB SMART MEDIA CONVERTER Converter.

The network device of Computer C may fail to work. Please check the
link/act status of Computer C on the LED indicator. Try another network
device on this connection.

The network configuration of Computer C may be something wrong. Please
verify the network configuration on Computer C.
2. The uplink connection function fails to work.

The connection ports on another must be connection ports. Please check if
connection ports are used on that converter.

Please check the uplink setup of the WEB SMART MEDIA CONVERTER to
verify the uplink function is enabled.