Ruby Fires TRIVERO 130, Руководство пользователя

Страница: 10 / 20

Usage
The appliance can be operated either by the touchscreen located on the front of the fireplace
heater or by the supplied remote control. All the functions of the remote are the same as on
the touchscreen.
Master switch
Master switch control the power supply to the appliance. Turn the switch to “I” to connect
power and turn the switch to “O” to cut the power. There will be chiming sound when turning
to “I”.
NOTE: Holding the buttons down for 10 seconds on the unit, will change
the temperature from °C to °F.
Power on/off
Touch the button once (icon will be light up) to turn on power for all functions.
Then touch the button once more to turn all functions off.
Flame intensity
Touch the button once to level up/down the flame intensity. There are total 4 levels.
The display will show F1,F2, F3 ,OFF to indicate the current intensity.
Glow effect
Touch the button once to turn on/off the glow effect.
Heat settings
This fireplace consist of a fan forced electric heater with two heat setting,
700W (“LO” shown in display) and 1400 W (“HI” shown in display).
Touch the button once (the icon will light up) to activate the heater at low level (700W). Touch
the button once more to active the heater at high level (1400W). When set in high level,
touch the button once to deactivate the heater.
Note: The fan will continue to run for a short time and turn off automatically after the heater is
turned off.
Timer settings
This fireplace is equipped with a timer ranging from 1hr to 9hrs (1H, 2H....9H shown
in display). Touch the button once for every 1hr increasement.
Do not leave heater unattended.
Display Tem-
perature
settings
Timer
setting
Heat
Setting
Glow effect Flame
intensity
Power
on/off