background image

TROUBLESHOOTING

Is the adjustable temp.control turn to maximum.
Is the mixer tap adjusted correctly.
Is the water heater given enough time to heat up.(if the 
temp.reaches the preset temp.,the red heater lamp will 
go OFF automatically).
Is the water heater capacity enough for the purpose.

Symptoms 

Solutions

A. No water coming out of 
     the heater 

Check whether all stop valves are opened.
Check whether the water supply is there.
Check whether the pressure relief valve over tighten.
Check whether inlet water supply connected to 
Pressure relief valve

B. Water heater is not working 

Check whether power supply is ON.
Is the main lamp ON.
Is the heater lamp ON.
Is the adjustable temp.control ON.
Is the mixer tap connected correctly.

C.Water not hot enough 

If any of the following abnormalities are present during usage, contact our service 
centres nearest to you or your sales agent immediately:
A. Water leakage.
B. Water temperature cannot be controlled.
C. Power and heating light does not light up.

Noted: The specifications of product is subjected to change& improvement without prior notice.

10

3. Suggest to examine the aluminum anode yearly or replace it every two years. To 

    do so, dismantle the heating element from the heater and unscrew the anode from 

    the supporting bracket.

2. To ensure the heater operates efficently, it is recommended to clean the inner 

    container and the deposits on the heating element once every two years.

4. In order to drain water out, it is important to check that the water heater has been 

    switched off long enough for the water inside to cool down before removing the 

    pressure relief valve. Flush the valve with water to remove any deposit of salts. 

    The valve can be removed and reattached by use of a wrench.

5. Disconnection of the water heater must be incoporated in the fixed wiring in 

    accordance with the wiring rules.

6. Check on a regular basis that pressure relief valve is operating correctly.

Содержание RSH-M100L

























Отзывы: