710
390
(3)INSTALLATION
(4)DIRECTION
FOR
USE
1.Open holes in the cupboard:
Open holes in the cupboard with the instruction paper in the package, hole size: 710mm
×
390mm.(see Fig. 2)
2.Install the gas pipe
A.If to use plastic tube: put in the airproof caution, connect the tube and hob connector, and
fasten the clip. (See
)
B.If to use metal tube: put in the airproof caution, and fasten the nuts on the connection.
(See
4).
Fig. 3
Fig.
3.Put the hob in the right hole on the cupboard, check whether it is installed in a balance.
The bottom of top plate should be stuck with seal packing.
4.Check leakage: turn on the gas valve; check whether there is leakage in the connection with
soap water. If any leakage, it needs to be reinstalled. (there will be air bubble for leakage).
Fig. 2
Fig. 5
Fig. 6
Fig. 7
Fig. 3
Fig. 4
window blinds
Ignition safety hob have flame failure protect device, when accident flame failure occurs by wind or
spilled liquid, the flame failure protect device will shut the gas supply automatically.
1.Put in battery properly. (Battery case in the right-front side at the bottom of the hob.)
OUTLET
ON
/
OFF
ADAPTER
POWER PORT
OUTLET
AT
THE
BOTTOM
Fig. 8
Fig. 9
2.Turn on the gas supply,
Turn on the power switch, switch stepping motor to zero, and check whether there is signal.
1)Timing
、
firepower display full screen for 1 second, having heard the sound of continuous
sparks .
2)After 1 second, Nixie tube displays “___ ___” but nothing else.
3)The screen will be clear after 6 seconds, system step into Standby time, the indicator
light of children-lock been on.( see Fig. 8)
Power
+/-
Power
+/-
ON
/
L
ON
/
R
Lock
/
L
Lock
/
R
High
Power
Low
Timer
Timer
Timer
Timer
High
Power
Low
Power
+/-
Power
+/-
ON
/
L
ON
/
R
Lock
/
L
Lock
/
R
High
Power
Low
Timer
Timer
Timer
Timer
High
Power
Low
Remark: Any operation is not allowed during the above process.
Start up (unlock).
Keep pressing on the “ ” for 2 second, indicator light off, (as Fig 9) the system is operable after
the sound of short sparks. After that, press “
”, left hob been on, screen displays the current
firepower. The default option for the fire power is 5 (the maximum valve), and the fire power is
adjustable, as follows:
Lock
/
L
ON
/
L
2
、
1. fire control:
You can choose five different flame by turning the hob:
Press “
” when the hob is on, system steps into fire control status, the screen displays
twinkling “
”. Press “ ” to adjust the fire power.
The “children-lock” will be locked if there is no operation within 15 second, the indicator light
on.
fire
Power
+/-
FIRE POWER
Inner ring
Outer ring
Level 1
Level 2
Level 3
Level 4
Level 5
Low
Off
High
Off
Low
Low
Medium
Medium
Maximum
Maximum
AIR VENT