manualshive.com logo in svg

Rubicon 604-181, Руководство пользователя

Поделиться
Скачать
Rubicon 604-181 Скачать руководство пользователя страница 6

Manual D450 • Fishing Bumper Subs • Page 5  

Logan Fishing Bumper Sub

 •  

5

KNOCKER SEAL/RING ASSEMBLY INSTALLATION

Completed knocker assembly with seal protec-
tor rings, non-extrusion rings, and O-rings cor-
rectly installed in the upper and lower grooves.

Install the O-ring. Stretch the o-ring until it is 

large enough to fit around the knocker.

Using the O-ring installation tool, insert the 
O-ring in the groove between the seal protector 
ring and non-extrusion ring.

Repeat seal/ring installation procedure on the 
upper groove. 

Matching the bevel of the non-extrusion ring  
to the bevel of the groove, carefully expand  

the non-extrusion ring to fit over the outside 

diameter of the knocker. Do not expand the 
non-extrusion ring more than absolutely neces-
sary. Slide the non-extrusion ring over the 
knocker and into the groove.

Before installation, carefully examine and clean 
each groove. Smooth out any nicks or burrs 
with emery cloth.

With the aid of the O-ring installation tool 
(Logan Part No. J1074, available upon request), 
press the seal protector ring into the groove 
next to the non-extrusion ring with the thumbs 

until the ring is firmly seated in the groove.

Содержание 604-181



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды