2175916
Connect Lid Insert to Lids
Attach Lids to Base
9. Place lids on top of the bases.
Slim Jim
®
Recycling Station Assembly Guide
(continued)
Connect Billboards to Bases
5. Insert the tab on bottom of billboard into base handle until it
clicks into place.
Apply Labels to Billboards
4. Remove backing from label. Align the bottom edge of the label
with the raised line on the billboard. Place label and smooth upward
within the recessed area on billboard.
©2022 Rubbermaid Commercial Products LLC | 8900 Northpointe Executive Park Drive, Huntersville, NC 28078 | Phone: 1-800-347-9800 | www.rubbermaidcommercial.com
6. Turn lid and lid insert upside down.
7. Feed the lid insert through the lid opening so that the lid insert’s tab is on
the outside of the lid.
8. Ensure the lid insert’s pegs snap into the lid’s corresponding peg holes.
After inserting one peg, pull the gray tab to the side on the other peg for
an easier connection.
