Rubbermaid HYGEN Скачать руководство пользователя страница 9

TOOLS

HOW TO:

wET MOP USING PRESS OR PEDAL wRING BUCkET

Press Wring Bucket • Q900-88  

Safety Sign • 9S09

18” MF Damp Mop • Q410

18” MF High Absorbency Mop • Q416 

Quick Connect 
Handle of Choice

18” Quick 

Connect Frame 

• Q560

PROCEDURE

1

 

Place Floor Safety Signs between work area and pedestrian access points.
 

Affix Quick Connect Handle to 18” Quick Connect Frame.

 
Place a clean, dry Q410 Wet Mop Pad or a Q416 High Absorbency Mop Pad on the  
floor with the white, logo-imprinted side facing upward. 

Push the Quick Connect Frame onto the mop pad.

 
Fill the bucket with the desired amount of cleaning solution.

Position the Quick Connect Frame into the bucket in a manner that will enable you to 
use the Quick Connect Handle to steer the bucket to the cleaning site.

 
Position the Quick Connect Frame, with mop pad attached, onto the sieve. Holding the 
handle upright, push downward to compress the wet pad against the sieve to expel 
excess cleaning solution.

 
Rotate the Quick Connect Frame with mop pad attached 180°, and repeat step 7 to 
complete wringing.

          
         Mop the floor using Figure 8 strokes, rewetting the mop pad as necessary  
         until the floor has been completely cleaned. 

 
If the mop pad becomes heavily soiled, the use the washboard-molded surface inside 
the front of the bucket to dislodge soil.

 
When the job is complete, empty the cleaning solution remaining in the bucket into a 
floor drain using the twist valve on the backside of the bucket. 

 
Remove soiled mop pads from the Quick Connect Frame utilizing one of the methods  
pictured in steps 13 through 17, at left.

2

 

3

 

4

 

5

 

6

 

7

 

8

 

9

 

10

 

11

 

12

 

13 

 

Note:

 this system is intended for use in areas requiring flood (wet) cleaning. It is not effective in areas  

requiring fast floor drying times.

TIPS

 • Follow all established safety  

procedures.

•  Wear all appropriate personal  

protective equipment (glasses,  

gloves, etc.).

•  Use High Absorbency mop pad to 

clean up messy spills or dirty floors.

Pedal Wring Mini-Cart • Q925

1

 

2

 

3

 

4

 

5

 

6

 

7

 

8

 

10 

11 

12 

13 

14 

15 

16 

17

17

Содержание HYGEN
















Отзывы: