2
Fit the TV post to your R7
Disconnect all cables from your R7, they are a
trip hazard.
If you allow the AC cord to be pinched between
parts, this may result in a short circuit or an
electric shock.
Carefully move your R7 so you have clear access
to the back of the cabinet. Do not drag your R7
along the floor as this may damage the legs.
We recommend you place a sheet of card or heavy
fabric on top of the R7 to protect it while you fit the
TV post.
Use the hex key provided to remove the four M8
screws on the back of your R7 as shown and then
use the same screws to secure the TV post to the
R7. Ensure the screws are then securely tightened.
3
Hang the TV onto the TV post
Carefully lift the television and hang it so that both
sets of hooks on each of the TV brackets fully
engage with both the top and bottom lips of the TV
backplate.
You can make minor adjustments to the tilt of the
television by loosening the two tilt screws by two
turns to allow the tilt bracket to move. Tilt the
television to your desired angle and hold it while
you tighten the two tilt screws.
4
Fit optional shelf post
Use the hex key to secure the shelf bracket to the
shelf post using 2x M6x12 screws. Ensure the
screws are tightened correctly.
Slide the shelf post into the base of the TV post
and secure it using the two thumbscrews
provided.
5
Fit glass shelf
Slide the glass shelf into place, ensuring it’s
pushed all the way back and centred left to right.
Adjust the height of the shelf.
6
Connect cables
Connect all the necessary cables to your television
and AV equipment on the shelf, taking care to
route all cables so that they will not be pinched or
damaged when adjusting swivel position of the
television.
Ruark Audio
59 Tailors Court, Southend on Sea, Essex, SS2 5TH, UK
www.ruarkaudio.com
20140901
tilt screws
2x M6x12 screws
2x M6 thumscrews
2x washers
2
3
4
5
Содержание R7 AV Mount
Страница 3: ...R7 AV Mount ...
