RTX8200 LOCATION GATEWAY GUIDE 4.6
9
|
P a g e
Proprietary and Confidential
Installation of Location Gateways
After planning the network, installing the base stations, the Locations gateways must be added, therefore, we briefly
describe how to install the location gateways. One important thing that must be decided before installing the location
gateways is how to power them.
Package
–
Contents/Damage Inspection
Before Package Is Opened:
Examine the shipping package for evidence of physical damage or mishandling prior to opening. If there is a proof of
mishandling prior to opening, you must report it to the relevant support center of the regional representative or
operator.
Contents of Package:
Make sure all relevant components are available in the package before proceeding to the next step.
Every shipped base unit package/box contains the following items:
•
Location Gateway
Please only use screws and actors with the following dimensions.
Screws: 30,7 mm (L), 2,6 mm (W)
Actors: 24,8 mm (L), 5,8 mm (W)
Damage Inspection:
The following are the recommended procedure for you to use for inspection:
1.
Examine all relevant components for damage.
2.
Make a “defecti
ve on arrival
–
DOA” report or RMA to the operator. Do not move the shipping carton until
the operator has examined it. If possible, send pictures of the damage. The operator/regional representative
will initiate the necessary procedure to process this RMA. They will guide the network administrator on how
to return the damaged package if necessary.
3.
If no damage is found, then unwrap all the components and dispose of empty package/carton(s) in
accordance with country specific environmental regulations.
