RTS Zeus III, Руководство пользователя

Страница: 40 / 70

40 Installation Zeus III
Bosch Security Systems, Inc. Technical Manual F.01U.193.289 Rev. 05
4.
Select the Network radio button.
The IP Address group box becomes active .
5.
Click OK .
The Communications window closes. The Zeus III is configured for Ethernet operation via the CAT-5 crossover
cable
.
Initial IP Configuration of the Zeus III
By default, the Zeus III is shipped with the IP Address 192.168.0.9 and the Net Mask 255.255.255.0. to change the IP Address
initially, you must connect either serially or via USB.
1.
Connect to the PC with AZedit via a serial or USB cable.
2.
In AZedit, from the Options menu, select Ethernet Setup .
The Ethernet Setup window appears .
3.
In the IP Address field, enter the IP Address for the Zeus III.
4.
In the Netmask field, enter the Netmask Address for the Zeus III, if needed.
5.
In the Gateway field, enter the Gateway Address for the Zeus III, if needed.
6.
Click Apply .
The IP Address, Network Mask, and Gateway Address are changed.
7.
Click Close .
The Ethernet Settings window closes .
NOTE: Remember to send your changes to the Matrix. To send changes to the matrix, from the edit menu, select
Send Changes
FIGURE 32.
Ethernet Setup Window