8 Installation and Configuration
VLink and VLink LE Control Panel User Manual
Bosch Security Systems, Inc.
User Manual
F01U217815 Rev 01
NOTE:
Often, but not always, the Select Microphone and Select Earphone / Speaker drop downs automatically
default to the correct settings.
12.
From the Select Microphone Connector drop down menu, select the
input jack
the audio input device is to use.
NOTE:
Typically this is named
Microphone
.
13.
Using the Set Microphone Level slider, adjust your
microphone audio level
, if necessary.
NOTE:
If
AGC
(Automatic Gain Control) is enabled, adjusting this control does not affect the audio level sent to the
Virtual Matrix, however an improper base setting may result in audio distortion.
14.
Click
Close
to save the configured settings and close the VLink/VLinkLE Control Panel Configuration window.
The VLink/VLinkLE Login window appears
.
To
log in to the control panel
, do the following:
1.
In the Login Name field, enter the
login name
.
2.
In the Login Password field (if configured for password protection), enter the
password supplied by your system
administrator
(Optional).
NOTE:
System Administrators: you can find default logins for users and devices in the VLink/VLinkLE System
Administration application (default login name
admin
with no login password), in the main window under
Client Configuration. Refer to the VLink/VLinkLE System Administration User Guide (PN F01U217816)
for more information.
3.
Click
Login
.
The Control Panel Window appears.
The VLink/VLinkLE Control Panel software installation is now complete and
you are ready to communicate.
If
a Firewall is active
, do the following:
>
Ask for
permission
to allow the VLink/VLinkLE Control Panel to communicate with the VLink/VLinkLE Virtual
Matrix, in which case you should select
Allow
and
do not ask me again
or their equivalents.