TIF-2000A
Installation and Operation 23
Re-dialing the Last Number
The TIF-2000A remembers the last number which it has dialed.
To
redial the last number
, do the following:
1.
Enter
dialing mode
by following instructions for dialing a call.
2.
Enter
CLR-0-0
.
The TIF-2000A automatically redials the last number it dialed.
3.
Momentarily
release
the talk key to exit dialing mode.
EXAMPLE:
If you have a call to 818.556.6700 and you are disconnected, issuing the redial command reestablishs the
call. The redial command may be issued from any keypanel in the intercom, not just the keypanel that
originally dialed the call.
Dialing a Speed Dial Number
The TIF-2000A has 24 internal memories for storing frequently used phone numbers.
To
dial one of these numbers
, do the following:
1.
Enter
Dial
mode.
2.
Enter
CLR-nn,
where CLR is the clear button on the keypad, and nn is two (2) digits, which are the speed dial code.
3.
Momentarily
release
the talk key to exit the dialing mode.
Storing a Speed Dial Number
1.
After making a call manually, but before exiting dial mode, enter the
CLR-PGM-nn
before you release the talk key to
exit dialing mode.
2.
Momentarily
release
the talk key to exit dialing mode.
NOTE:
To generate a pause during auto dial, enter *99. This is used, for example, if you need to enter a digit to get an
outside line, and your phone system requires a pause before continuing to dial. Each number may contain up to
25 digits.
A TIF-2000A can have different numbers stored in it. The TIF-2000A stores the numbers in non-volatile memory and therefore
does not require a UPS to maintain stored speed dial numbers.
Answering a Call
When a line is ringing, the alpha-numeric display or LED above the talk key which is programmed for that line flashes rapidly.
To
answer a call
, do the following:
1.
Turn the
listen key on
.
2.
Press the
talk key
and speak into the microphone or headset.
NOTE:
If the keypanel is programmed as a default station, your panel rings whenever one of the lines ring. If you do not
have a key already programmed, the ringing line appears in the CWW window. To answer, press the incoming
call key and answer. You should copy the key to a main key position, either just before or just after you answer,
so you can turn on the listen key to hear the caller’s audio.