RTS RVON-16, Руководство пользователя

Страница: 11 / 50

Bosch Security Systems, Inc.
Technical Manual
F.01U.193.291 Rev. 06
CHAPTER 2
RVON-16 Card Channel Assignment
RVON-16 Channels
With the introduction of RVON-16 cards into the ADAM system, the number of channels available doubles from 136 to 272
channels. This is because instead of the eight (8) channels of audio per RVON-8 card, you now have 16 channels of audio per
RVON-16 card. To be backwards compatible with the RVON-8, the RVON-16 channels have been split in to two (2) groups of
eight (8) channels; an upper group and a lower group. The channel numbering sequence follows the lower group channels
before numbering the upper group channels. For example, if you have an RVON-16 card in slot one (1) of an ADAM frame,
the bottom group of eight (8) channels has channels 1-8 assigned to them, while the top group of eight (8) channels has
channels 137 to 144 assigned to them (see Figure 1).
The ADAM Intercom System can run both the RVON-8 and RVON-16 card in the same frame. You can position your
RVON-8 and RVON-16 cards in any slot or in any sequence within the ADAM frame. However, when mixing the RVON
cards, it is important to consider that the channel numbering is consistent with the 2-tier channel systems. For example, in slots
1, 2, and 3, you have RVON-8 cards and in slot 4 you have a RVON-16 card. The channel numbering scheme assigns eight (8)
channels per card for the first four (4) slots. When assigning ports to slot four (4), the bottom group of channels are assigned in
sequence with the RVON-8 cards; however, the top group of ports associated with the RVON-16 card are assigned the
corresponding channels with the card position. This means channels 137 through 160 are not used and the top group of
channels used by the RVON-16 card starts with channel 161 (see Figure 2 on page 8).
FIGURE 1.
ADAM frame with RVON-16 cards only and the port numbering scheme