OMNEO Configuration
2
OMNEO OMI Card Configuration
1.
Use the
Quick Start Guide OMI – OMNEO Matrix Interface
to install the OMI card into an
ADAM or ADAM-M.
2.
Connect the OMI card to your network via the
Ethernet Connector J1
or the fibre connector.
3.
Using AZedit under
Options\Preferences\Discovery
select your network interface from the
drop down list that will be used for the OMNEO configuration.
4.
Using AZedit under
Options\Port Allocation
table assign port numbers to the OMI card.
