RTS OMNEO OEI-2, Руководство пользователя, Страница: 37 / 40

Bosch Security Systems, Inc.
Technical Manual
F.01U.287.527 Rev. 01
APPENDIX A
Optional Power Supply Mount
Power Supply Rackmount Assembly Instructions
An optional power supply rackmount is available for purchase (P/N RP_OEI_PS_BRK), if needed.
To mount the power supply rackmount assembly , do the following:
1.
Holding the rackmount assembly unit in the spot you want to mount it, make guide marks , using a marker, for the
screw placement.
TIP: To make attaching the unit easier, pre-drilling the screw holes is suggested.
2.
Using a screwdriver, attach the rackmount assembly unit to the predefined mounting area with the two (2) screws
supplied.
3.
Carefully slide the power supply into the rackmount unit, as shown in Figure 18.
FIGURE 18.
Power Supply Mounting Assembly