RTS DKP-4016, Техническое руководство

Страница: 29 / 282

DKP-4016 Installation 29
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Footswitch Cabling
A Footswitch is a foot activated device used to turn a talk key on or off. There are two (2) steps to cable and configure a
footswitch:
Step 1 Cable the device to the keypanel.
Step 2 Configure the GPIO as a talk key on the keypanel. See “Service Menu, Local GPIO” on page 232.
OR
Enable the Footswitch in the keypanel menu. See “Service Menu, Footswitch” on page 226.
To attach a footswitch to the DKP-4016/4016W , do the following:
1.
On the back panel of the DKP-4016/4016W, locate J10, the 12-position terminal block .
2.
Using Figure 4, cable the footswitch to OPT 1 at the K- and Chassis ground positions .
FIGURE 4.
Footswitch Cabling and Wiring