RTS ADAM-CSedit, Руководство пользователя

Страница: 19 / 64

Creating a Special List
A special list is a group of ports that a keypanel operator
can talk and/or listen to by pressing a single key. Special
lists are useful for paging, all-call, group call, all-listen or
group listen.
The following procedure lets you create a special list by
assigning ports to the list. You can also assign a meaning-
ful name for the special list. Once you have configured a
special list, you can assign it to any keypanel key as de-
scribed starting on page 2-15.
To set up a special list:
1. From the System menu, select “Special Lists” to open
the special list pick list (Figure 2-6). The default Al-
pha names for special lists are SL01, SL02 etc. As
you configure special lists you will also change the
Alphas to more meaningful names for your intercom
system.
2. To select a special list, highlight it using the cursor
keys, then press the ENTER key (or click on a spe-
cial list with a mouse). A special list edit screen
should appear (Figure 2-7).
3. Figure 2-7 shows a typical special list edit screen for
special list SL19. To assign ports to the special list,
use the Special List Port Assignments table at the bot-
tom of the screen. Position the cursor in the “S” col-
umn next to a port that you want to add to the special
list. Then, use the SPACE BAR (or click with a
mouse) to insert a check mark
û in the column. In the
example in Figure 2-7, ports 1, 6, 16 and 36 have
been assigned to the special list.
4. Relays* may be assigned to a special list for activation
along with the special list. To assign a relay to a spe-
cial list, TAB to the Special List Relay Assignments
window and press ENTER. (Or click on the window
with a mouse.) The special list relay assignment
screen should appear (Figure 2-8). Type in the Alpha
names of up to four relays in the relay assignment ta-
ble at the left side of the screen. Or, use the Relays
pick list at the right side of the screen to enter Alpha
names into the table. In the example in Figure 2-8,
the relays with default names RY02 and RY04 have
been assigned to the special list.
* The generic term “relay” refers to the digital outputs of
an ADAM-CS Frame (available at J903) or the relay
outputs of an optional UIO-256 or FR9528 Frame.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Help File Keys System Status Sort Screen Options Intercom ³
³ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»³
³ ºAlpha ³ Spl ³ º º Alpha SL01 Special List 1 º³
³ ºÄÄÄÄÄÄÅÄÄÄÄÄÅÄÄĺ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ³
³ º SL01 ³ 1 ³ º ³
³ º SL02 ³ 2 ³ ² º ³
³ º SL03 ³ 3 ³ ² º ³
³ º SL04 ³ 4 ³ ² º ³
³ º SL05 ³ 5 ³ ² º ³
³ º SL06 ³ 6 ³ ² º ³
³ º SL07 ³ 7 ³ ² º ³
³ º SL08 ³ 8 ³ ° º ³
³ º SL09 ³ 9 ³ ° º ³
³ º SL10 ³ 10 ³ ° º ³
³ º SL11 ³ 11 ³ ° º ³
³ º SL12 ³ 12 ³ ° º ³
³ º SL13 ³ 13 ³ ° º ³
³ º SL14 ³ 14 ³ ° º ³
³ º SL15 ³ 15 ³ ° º ³
³ º SL16 ³ 16 ³ ° º ³
³ º SL17 ³ 17 ³ ° º ³
³ º SL18 ³ 18 ³
▼
º ³
³ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ³
³File: New Mode: Off-Line ³
³ ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Figure 2-6. The Special List Pick List
2-8 CSedit User Manual