RTS 9010673800, Руководство пользователя

Страница: 7 / 16

CHAPTER 1
Connections And Operation
This section describes operation of the BP325 as supplied from the factory. Use of an RTS power supply to power the intercom system is
assumed. For options and use of an alternate power source (See “Programmable Options” on page 5. and See “Alternate Powering
Methods” on page 7..
Connections
Headset
Connect a headset using one of the three headset connectors on the back panel. The MONO HEADSET and STEREO HEADSET
connectors are for monaural or stereo dynamic-mic headsets. The CARB-MIC HEADSET connector is for a monaural carbon-mic headset.
Refer to the specifications for pin-outs of these connectors if needed.
Intercom Channels
Connect the BP325 to the intercom system using the LINE INPUT connector on the back panel.
If desired, connect an additional intercom station to the intercom system using the LINE LOOP connector on the back panel.