Battery Safety
WARNING: Li-ion batteries, if incorrectly used, stored or charged, are a fire, burn and explosion hazard.
Keep the battery out of reach of children
ONLY charge li-ion batteries using the charger provided or one designed specifically for the product
ONLY use li-ion batteries provided with a product or specifically designed to be compatible
Allow batteries to cool for 15 minutes after charging or heavy use. Failure to follow these
instructions may cause overheating or fire
When not in use batteries should be stored at room temperature (approximately 20˚C)
Ensure battery contacts cannot accidentally short in storage. Keep batteries clean; foreign objects
or dirt may cause a short. Keep away from other metal objects, for example paperclips, coins, keys, nails
and screws
Under abusive conditions, liquid may be ejected from the battery. This liquid may cause skin
irritation or burns. Avoid contact. If contact occurs accidentally, flush with water. If liquid contacts eyes,
seek medical help
DO NOT open, disassemble, crush, heat above 60°C, or incinerate. Do not dispose of in fire or
similar
Unpacking Your Tool
.
Carefully unpack and inspect your tool. Fully familiarise yourself with all its features and functions
.
Ensure that all parts of the tool are present and in good condition. If any parts are missing or
damaged, have such parts replaced before attempting to use this tool you can contact your retailer.
Installing a battery
.
Fit a charged battery by sliding it onto the base of the worklight until it clicks and locks into position
NOTE: Make sure the battery and worklight are lined up correctly. If the battery does not slide onto the
base of the worklight easily, don’t force it. Instead, slide the battery out of the worklight and check the top
of the battery and the battery slot of the worklight are clean and undamaged, and that the contacts are not
bent.