RTRMAX RTM240, Оригинальное руководство пользователя

Страница: 3 / 10

POWER TOOL’S UNITS

SDS BITS CHUCK

SIDE HANDLE

GRESS COVER

HAMMERING/DRILLING SELECTOR

ON/OFF SWITCH
USING AREAS
YOUR
‘RTRMAX’
HAMMER DRILL HAS BEEN DESIGNED FORDRILLING IN CONCRETE,
STONE, WOOD AND STEEL AND LIGHT CHIPPING AND CHISELING APPLICATIONS.
SAFETY INSTRUCTIONS
Read all instructions failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
The voltage of the power source must agree with the value given on the nameplate of the machine.
Before using the tool, check the tool and it’s power connections if there is any damagement.
Don’t connect the plug to power source when switch is on.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Extreme temperature differences cause water droplets on power conducting parts . Before switch on
the tool, wait tool to get same temperature working room temperature.
Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the
manner intended fort he particular type of power tool, taking into acccount the work conditions
and the work to be performed. Use of the power tool for operations different from intended could
result in a hazardous situation.
Fit workpieces and for fitting the workpieces, use clamping equipments or vice.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loosing clothes, jewellery or long hair can be caught in moving parts.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate.
When working with the machine, hold it firmly with both hands and provide for a secure stance.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
When power tool is given to other people, this instruction manual must be given with power tool.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
WARNING: Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol