Additional safety instructions for battery powered drills
Before working on a component, ensure that the component is held down using a vice or
fastening clamp.
Do not use excessive pressure, but instead select an appropriate speed. Excessive pressure
will not increase drilling efficiency, and may damage your appliance.
Set the rotation direction switch to its central position when machine not in use in order to
avoid accidental operation.
Only use the battery charger in closed rooms and do not expose this to rain or humidity.
When inserting the batteries into the battery charger, ensure that the correct polarity is used.
Do not use a battery charger whose power lead is damaged. Always replace or repair this.
In the event of damage being apparent to the battery charger housing, have this examined
by a specialised repair shop and if necessary replaced.
Always wear protective eyewear and ear protectors when working. A dust mask should be
worn during any dust-producing work.
Specification (Fig. 1)
1.
Keyless drill chuck
2.
Adjustable ring for torque / boring
3.
1 / 2-way operating switch
4.
Left / right-hand motion changeover switch
5.
Operating button
6.
Battery pack
Battery powered drill:
Voltage 20V Li-ion battery
Engine: 550 #
Idle speed 1: 0-400 minutes
Idle speed 2: 0-1400 minutes
Maximum torque: 35N.m
Torque setting: 18 + 1
Chuck capacity: 0.8-10mm
7. Battery attachment clip
Technical data
