RTR MAX RTM393, Руководство по эксплуатации, Страница: 5 / 13

When servicing a tool, identical replacement parts only are to be used. Follow the instruc-
tions in the “Maintenance” section of this manual. The use of unauthorized parts or failure
to follow the maintenance instructions may result in electric shock or injury.
SPECIAL SAFETY RULES
Before switching on, check whether the mixing bar and whisk are secured correctly.
Only take the whisk out of the liquid when the motor has stopped completely. Only take
the whisk out of the liquid when the motor has stopped completely.
Always wear safety goggles to protect the eyes against splashes of liquid.
Operating instructions
The voltages specified on the rating plate must correspond with the mains supply (i.e.
220-240V)
1. Replacing the carbon brush.
Using the screwdriver to remove the brush holder cap. Insert the original carbon brush that
supply by factory and secure the brush holder cap.
2. Install and remove the mixing bar.
Hold up the output spindle by wrench, then rotate the mixing bar according to the dirction of
clock-wise till tightened. On the contrary, remove the mixing bar.