Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
Z603 Reference Manual V1.2
17
Software version supporting instructions
Z603 is a complete product with Jetson Nano/Xavier NX/TX2 NX module as the core. Provide
developers with one-stop terminal equipment to assist developers in application development.
Z603 Feiyun Smart Box supporting software includes:
-
L4T (Linux for Tegra): L4T provides "OS" for your Feiyun Smart Box, including Linux kernel, boot
loader, board support package (BSP) and sample file system. (By default, the pure system has been
installed for the device, Jetpack needs to be installed by itself)
-
Jetpack: Jetpack sdk is the most comprehensive solution for building AI applications. It includes
software libraries and apis, examples, developer tools and documentation for the latest and previous
versions of Jetson products.
1 use
1.1 Smart box power on and start
a) Make sure that the voltage of all external systems is turned off
b) Install the Jetson Nano/Xavier NX/TX2 NX core module to the 260-pin SO-DIMM
connector.Please pay attention to the alignment between the connectors during the installation process,
and install the fixing screws at the same time.
c) Install necessary external cables. (Such as: the display cable connected to the HDMI monitor, the
power input cable to power the system, the USB cable connected to the keyboard and mouse...)
d) Connect the power cord to the power source.
e) Z603 adopts automatic/manual power-on design, turn on the power and the system starts to work.
f) For a system without a protective enclosure, after the system is powered on, please avoid moving
the entire system, and it is strictly forbidden to touch the circuit board and its electronic components
with your body.
1.2 Recovery Mode
Jetson Nano/Xavier NX/TX2 NX core module can work in normal mode and Recovery mode. File
system update, kernel update, boot loader update, BCT update and other operations can be performed in
Recovery mode.
The steps to enter the Recovery mode are as follows:
a)
Turn off the power supply to the system.
b) Use a USB cable to connect the Micro USB(OTG) port of the Z603 and the USB port of the
Host(PC) development.
c) Press the Recovery button without releasing it to supply power to the system, keep the power supply
for more than 3 seconds, then release the Recovery button.
d) The system enters Recovery mode, and subsequent operations can be performed at this time.
。
