Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
RTSO-6001B Product Manual V1.2
19
Software version supporting instructions
1 Installation and use
1.1 picture of products
1.2 How to use the board
The carrier board cannot work alone, it needs to be used in conjunction with the Nano module. After
aligning the inter-board connector with the module high-speed connector, press evenly with both hands
to connect it; and use the screws provided with the product to reinforce and fix it.
Before using the 6001B carrier board, you must confirm that the Nano core module has an operating
system loaded with realtimes BSP. For the installation of the operating system and jetpack, please refer to
the
Nano system instruction manual
(Ruitai cloud network disk/help document).
a) Ensure all external system voltages are turned off
b) install the core module of Nano on the 260 Pin so-dimm connector. Please pay attention to the
alignment between connectors during the installation process, apply uniform force, and install the
fixing screw at the same time.
c) install necessary external cables.(e.g., the display cable to the HDMI monitor, the power input cable
to power the system, the USB cable to connect the keyboard and mouse...)
d) connect the power cord to the power supply.
e) RTSO-6001B adopts automatic/manual power on design. Turn on the power and the system starts to
work.
f) for systems without protective enclosure, please avoid moving the whole system after the system is
powered on. It is strictly prohibited to touch the circuit board and its electronic components.
Jetson Nano modules are designed to optimize power efficiency and support multiple
software-defined power modes. These power modes limit the budget of the module to around 5W or 10W
by limiting the GPU and CPU frequencies and the number of CPU cores online to pre-approved levels.
