Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
RTSO-1001 Product Manual V1.6
22
Software version supporting instructions
1
Installation and use
1.1 picture of products
1.2 Usage
a) Ensure all external system voltages are turned off
b)
Install the AGX Xavier /AGX Xavier industry/Orin core module on the 699-PIN SO-DImm connector.
Pay attention to the pairs between the connectors during the installation install the fixing screw at the same time.
c)
Install necessary external cables. (e.g., the display cable connected to the HDMI display, the power input
cable that powers the system,USB cable linking keyboard and mouse...)
d)
Connect the power cord to the power supply.
e)
RTSO-1001 adopts automatic power-on design, turns on the power and the system starts to work.
f)
For the system without protective enclosure, please avoid moving the whole system after the system is
powered on. It is strictly prohibited to use body touch road board and its electronic components.
1.3 Recovery Mode
The Jetson AGX Xavier /AGX Xavier industry/Orin core module can work in normal mode and Recovery
mode, under which the file series can be carried out system update, kernel update, Boot Loader update, BCT
update and other operations.
The steps to enter the Recovery mode are as follows:
a)
Turn off the system power supply.
b)
Use a USB cable to connect the RTSO-1001's USB port (P10) with the Host (PC) development host
USB port.
c)
Press the RECOVERY button without releasing it to power the system. The power supply should be
maintained for more than 3 seconds, and then the RECOVERY button will be released.
