RTI VFX-124, Руководство пользователя

Страница: 28 / 64

Single Plug-in Card Matrix Switcher
21
5. IR Remote Control
Connect an IR receiver to IR EYE on the rear panel, users can control the switcher with
the included IR remote (shown as below):
5.1 IR Remote
①
Standby : Enter/ exit standby mode
②
INPUTS : Input selection buttons, channels
1~16 should be pressed as 01~16.
For example, press
input “
0
”, and then press
input “
1
” to select the first input channel.
③
ALL : Select all inputs or outputs.
④
EDID : Press this to enter EDID management
menu.
⑤
Clear : Press this to cancel the operations
before pressing “
ENTER
”.
⑥
Arrow keys ( Up, Down, Left and Right ) and
ENTER button

Press
“
Left
” key at any interface can enter
SIGNAL ROUTING menu.

Press
“
Up
” and “
Down
” key to select the
embedded EDID in the EDID management
menu.
 Press “
Right
” key at any interface can
enter EDID menu.
 Press “
ENTER
” to confirm operation.
⑦
OUTPUTS : Output selection buttons,
channels 1~16 should be pressed as
01~16.
For example, press
output “
0
”, and then press
input “
2
” to select the second output channel.
1
2
3
6
7
5
4