manualshive.com logo in svg

RTI TheaterTouch T2, Руководство пользователя и программирования

Поделиться
Скачать
RTI TheaterTouch T2 Скачать руководство пользователя страница 84

TheaterTouch System Controller 

74

 

To properly align a donor remote control with the 

TheaterTouch

:  

 

1.  Make sure the donor remote has fresh batteries then line up donor remote 

so that is at the same height as the learning window on the 

TheaterTouch

. It 

may be necessary to place the donor remote control on a higher surface 
than the 

TheaterTouch

, or vice-versa.   

2.  Press any key on the donor remote control, moving the remote back and 

forth in front of the learning window. The donor remote control is located 
at the proper distance from the 

TheaterTouch 

when the

 Signal

 box is on 

(darkened) and the frequency read-out is stable. The frequency readout 
should not be 0.0kHz if it is possible to get it to read any other number by 
moving the donor remote around. If the

 Signal

 box is off (white), the 

TheaterTouch 

is not detecting any infrared signal. 

3. If 

the 

Overload 

box is darkened, the donor remote is too close to the 

TheaterTouch. 

Move the donor remote away from the 

TheaterTouch 

until 

the 

Overload 

indicator turns white. 

 

 

 

    

Learning Window

Approximately

2-4"

   

Содержание TheaterTouch T2























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды