Operation
15
TIME OUT
This button displays a window that allows you to adjust the
amount of time the unit stays in active mode after the last button
press. The time is variable from 1 second to 60 seconds (the
default is 10 seconds). Press the arrows to the left or right of the
Time Out
setting to adjust the time. Press the
OK
button in the
window to close it.
CHANGE PASSCODE
This button displays a window that allows you to set the passcode
that is used to limit access to the Clear All function on the Control
Panel page, as well as the Button Lockout function that is
available on all buttons.
When you press the
CHANGE PASSCODE
button, the screen will
prompt you to enter the
old
passcode. Press the
ENTER
button
after entering the numbers.
(The default code is
0000)
.
Содержание rk2
Страница 15: ...RK2 Universal System Controller 8...
Страница 25: ...RK2 Universal System Controller 18...
Страница 31: ...RK2 Universal System Controller 24...