RTI MRP-64, Инструкция по установке и эксплуатации

Страница: 9 / 28

9
It’s Under Control
®
thank you for using the MRP-64 Multi-Room Control Processor.
The MRP-6 embraces a new concept in distributed audio by acting as the
interface between a multi-zone audio/video receiver and an assortment of
RTI in-wall and handheld controllers.
The MRP-6 allows the homeowner to take full advantage of the multi-zone
features built into their surround receiver – expanding the entertainment
beyond the media room.
The MRP-6 is a powerhouse of control in a small package. Loaded with
features, the MRP-6 has six keypad ports for RTI In-wall controllers, four
independent IR output ports, three voltage trigger outputs, three voltage
sense inputs and an IR signal input. The MRP-6 also comes equipped with
advanced features such as an Ethernet port for programming, two-way
RS-232 communication, support for Zigbee
®
wireless communication, and
other expansion capabilities.
IMPORtant nOtes
Please read these important notes about the MRP-6:
The MRP-6 should be placed in an area where it is around normal
room temperature (between 60°F to 90°F).
Avoid installing the MRP-6 in a location where it can come in contact
with direct sunlight.
Do not let the MRP-6 get wet. It should not be handled with wet
hands or placed in an area where it could get wet.
Do not subject the MRP-6 to smoke, dust, or vibrations.
Only use the power supply that is specified for the MRP-64. Using the
wrong type of power supply may result in damage.
Do not disassemble the unit. Service of the MRP-6 should be
performed by authorized personnel only.
COMPatIbIlItY
An IR input insures compatibility with all RTI in-wall and handheld
controllers as well as industry standard IR repeater systems.
sOFtWaRe ReQuIReMents
The recommended minimum system requirements needed to run the
Integration Designer
®
software are as follows:
Windows XP
®
, Windows Vista
®
or later version of Microsoft operating
system.
CHaPteR 1 | WelCOMe