RTI CP-1650, Руководство по установке и эксплуатации, Страница: 17 / 28

17
It’s Under Control
®
CHAPTER 3 | INSTALLATION AND OPERATION
CONNECTING THE 115VAC POWER CORD
The included AC power cord must be inserted into the AC input receptacle
on the CP-1650. When the AC power cord is connected to a power source,
press the Power button to turn the CP-1650 on and off.
IMPORTANT NOTICE FOR INTERNATIONAL DISTRIBUTORS
This product is shipped from RTI with AC voltage set to 115 Volts. The
voltage will have to be changed for certain international locations.
International distributors should take the following critical step.
• Ensure that the voltage switch is set properly for your location.
The red voltage switch on the bottom of the product may need to
be changed to the 230 Volt position.
*The red voltage switch should be left in the 115 Volt position if
used within the United States.
Tel:886-2-2245-8945 Fax:886-2-2245-0853
MM
Mar,07,11'
CP-1650
Front Panel
1:1
FP.CDR
11R-8685
v02
POWER
Model
Cool Power
Audio Amplifier
CP-1650
®
FREE STANDING
The CP-1650 ships with four removable feet that allow the CP-1650 to be
placed on a flat surface. To maintain proper ventilation and cooling, do not
install the CP-1650 on a flat surface without the feet.
RACK MOUNT
The CP-1650 can be mounted in a component rack using the included rack
mounting ears. Align the rack mounting ears with the screw holes located
on the sides of the CP-1650 near the front. Fasten the rack ears to the
CP-1650 using three screws (supplied). Remove feet before mounting in a
rack.
NOTE: To maintain proper ventilation, it is recommended that you leave a
rack space above and beneath the CP-1650 if possible.
Foot
Rack Mounting Ears