RTI AD-16x, Инструкция по установке и эксплуатации

Страница: 32 / 48

Audio Matrix Switch
AD-16x
32
WEB INTERFACE - ZONES PAGE
The Zones page of the web interface is used during AD-16x setup, allowing
you to adjust the source, power, mute, volume and the assigned group using a
device with a web browser such as a PC, tablet or smartphone.
View this page by clicking the “Zones” tab at the bottom of the web interface.
ZONE CONFIGURATION
Click the “+” to the left of the zone name that wish to configure.
OPTIONS:
•
Sources: Select the audio input source for this zone.
• Power : Click on this button to power the zone on and off.
• Mute : Click on this button to mute and unmute the zone.
• Volume: To adjust the volume level, use the raise and lower buttons or click
on the volume slider bar to jump to a level.
CAUTION: Clicking on the volume level bar will cause the volume to
JUMP to that level. Be cautious where you click the volume slider bar to
avoid inadvertantly raising the volume to a high level.
• Balance L/R: To adjust the left and right output balance level, drag the
adjustment button to the desired level or click on the slider bar to jump to a
level.
• Bass: To adjust the bass level, drag the adjustment button to the desired
level or click on the slider bar to jump to a level.
• Treble: To adjust the treble level, drag the adjustment button to the desired
level or click on the slider bar to jump to a level.
• Graphic Equalizer: Current audio frequency levels are displayed on the
slider bars. To adjust the level of each frequency, drag the adjustment button
to the desired level or click on the slider bar to jump to a level.
• Group: Select the group that this zone will be a member of, or select “None”.
Grouped zones will be controlled together, allowing volume levels to be
adjusted simultaneously in multiple zones.
NOTE: Zones can only be a member of one group.
CHAPTER 3 | INSTALLATION AND OPERATION