rtd IPWR104HR-100W, Руководство пользователя

Страница: 14 / 29

IPWR104HR 14
RTD Embedded Technologies, Inc
Fig. 1-3 IPWR104HR power supply power connections
Connector descriptions:
• J1 : Input power to the IPWR104HR. Input voltage ranges 18-36V / 36-72V DC.
Note: The module input power may be up to 75 W (4A), this will require a cable wire
diameter of 1,5 to 2,0 sq. mm. Make sure this input wire is kept as short as
possible to reduce voltage drops.
•
J2
: +5V Output of the main power supply
•
J11:
-12V Output
• J4: +12V Output
• J12 : Floppy power output connector , +5V and +12V outputs:
Pin #1 +5V, #2,3 GND and pin #4 +12V
•
X1:
Remote ON/OFF , close this jumper to enable the IPWR104HR
Note: The X1 jumper has been replaced by a wire to improve vibration performance. If the customer requires the remote
ON/OFF function, contact the factory for details.