![RTC SME ICE 500 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/rtc/sme-ice-500/sme-ice-500_instruction-manual_1497460005.webp)
- 8 -
- 9 -
Inserting the Glass jug
1. Make sure that the blender is switched off (Switch in the“0” setting) .
2. Place the jug assembly (9) on to the motor block (7) and press down until securely engaged.
Edelstahlbehälter einsetzen
1. Der Mixer muss ausgeschaltet sein (Schalter auf “0” Position).
2. Den Behälteraufbau (9) auf den Motorblock (7) setzen und nach unten drücken, bis er sicher befestigt
ist.
USE
1. Place the food stuff you wish to process into the glass jug.
2. Put the lid on the glass jug and close securely. Place the measuring cap into the hole in the lid and turn
clockwise to lock.
3. Switch on the motor block.
SPEED SETTING
USE
“1-2” setting
for light usage with liquids
“3-5” setting
for more solid consistency for mixing liquids and solid
foodstuff
“P” setting
for ice crushing & short, powerful impulse movements
After using the blender, always move the switch into the “o” setting and pull out the mains plug.
To remove the glass jug just lift it up. you do not have to rotate the glass jug to remove it.
USEFUL TIPS
•
To achieve the best results when pureeing solid ingredients,place small portions into the glass jug one
by one instead of placing a large quantity all at once.
• If you are processing solid ingredients, cut them into small pieces(2-3cm) first.
• When mixing solid ingredients start off first with a small amount of liquid. Gradually add more and more
liquid through the opening in the lid.
•
Always place your hand on top of the blender when you are operating the device.
•
Be careful when processing hot liquids.
•
For stirring solid or very thick liquid ingredients we recommend that you use the blender in impulse
mode to prevent the blades from becoming stuck.
MOTOR BLOCK
Never immerse the motor block in water. Wipe it only with a moist
cloth, Then wipe it with dry cloth again.
SIMPLE CLEANING/RINSING OUT THE ASSEMBLED GLASS jUG
1. When cleaning the blender, use Pulse button for easy removal of contents in blender.
2. To cleaning the blender jug, fill it with some hot water. Then press the pulse button for a few seconds.
Remove jug and then wash in the water. After washing, please wipe the blender with damp cloth, then
wipe it with dry cloth again.
3.Do not clean the motor unit in water, wipe the motor unit with damp cloth.
THOROUGH CLEANING OF THE DISMANTLED GLASS jUG
Ensure that the glass jug is completely empty before you unscrew the retaining ring. Be careful when
handling the cutting blade. All removable parts are suitable for the dishwasher.
We reserve the right to make amendments.
NOTE
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Always disconnect the blender from the supply if it is left unattended and before assembling,
disassembling or cleaning;
4. Switch off the appliance before changing accessories or approaching parts which move in use.
5. Correct Disposal of this product:
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at
a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the
instructions for use or the packing will inform about the methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling, material recycling or other forms of
re-utilization of old appliances, you are making an important contribution to protect our environment.
Please inquire at the community administration for the authorized disposal location.
Printing errors excepted.
your service hotline for Austria:
+43 2236 660 606 66