Loosen the screw indicated in the illustration on the hinges
⑮
and separate the parts:
•
The small parts
ⓐ
will be used on the next step.
•
The big parts
ⓑ
will be used until step 17, please set them aside.
STEP 9
Hardware:
❼
10#x1/2”
4
Pcs
⓭
Hinge “a”
2
Pcs
You might also need to tighten this
screw a little bit.
Assemble the small hinges
⑮
ⓐ
to the plastic bases
⑫
on panel
Ⓓ
using screws
⑦
as
shown.
STEP 8
Small parts
ⓐ
will be
used on next step.
Big parts
ⓑ
will be
used until step 21.
15a
PAY ATTENTION TO THE
ORIENTATION OF THE PARTS
1
st
: Install and align the cam locks
⑨
into panel
Ⓒ
in the locations indicated.
2
nd
: Assemble the panel
Ⓛ
to panel
Ⓒ
as shown and as explained in page 4.
3
rd
: Join the panel
Ⓖ
to panel
Ⓒ
as shown (wooden pins enter into the holes).
STEP 10
Hardware:
❾
Cam lock
2
Pcs
PAY ATTENTION TO THE
ORIENTATION OF THE PARTS
(R
igh
t)
(This view is from the underside of the unit)
SEE PAGE 4
DO NOT REMOVE THE
SCREWS FROM ANY
OF THE 2 PARTS.
P.8
RTA-8807
P.8